1. Automatic Voltage Regulation (AVR): Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
2. Telephone dataline surge protection: Provides protection of connected equipment from power surges traveling on telephone lines.
3. USB connection: Use your PC to access additional power protection and management features for your UPS via a USB Port.
4. LED status display: Quickly understand unit and power status with visual indicators.
5. Audible alarms: Provides notification of changing utility power and UPS power conditions
6. Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
7. Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
8. Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
9. Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
APC SMART UPS 1000VA
APC Back-UPS 1000VA, 230V, AVR, IEC Sockets
Battery Backup & Surge Protector for Electronics and Computers
Includes : User Manual
1. Cold-start capable: Provides temporary battery power when the utility power is out.
2. Energy meter: Provides actual kilowatt hours of usage for energy conscious users.
3. Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
4. High online efficiency: Reduces utlility costs, generates less heat.
5. Intuitive LCD interface: Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
6. Predictive replace battery date: Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
7. Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
8. Single switched outlet group: Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
9. SmartSlot: Customize UPS capabilities with management cards.
10. Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
Availability:
1. Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
2. Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
3. Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
4. Disconnected battery notification: Warns when a battery is not available to provide backup power.
5. Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
6. Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
7. Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
Adaptability:
1. Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
2. Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
₦170,000.00
CompareBased on 0 reviews
Be the first to review “APC SMART UPS 1000VA”
-
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Powertec 12 Way 100A Three Phase(TPN) Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroPowertec 12 Way 100A Three Phase(TPN) Distribution Board C/W MCB
Features
Compact DBs which occupy minimum space
Raised neutral link for easy wiring
Suitable for surface & fush mounting
Detachable din bar with end stoppers for easy assembly of breakers
Supplied with fully shielded bus-bars
Level marks for providing indication for fitment in wall
Supplied with neutral & earth link, top & bottom detachable plates
Supplied with masking sheet to protect components from cement during plasteringSKU: 277 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
70mm x 4Core Amroured Cable (Nigerchin Cable and Wire)
70mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
70mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
No. of cores / size of cable – 4
Approx overall diameter – 36.8mm
Approx weight (m) – 4.23Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel Wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Primarily found in large powered networks as well as buried underneath roads supplying mains electricity to large buildings etc.
Voltage Rating – 600/1000VtSKU: 70mmnigerchin -
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Torch B22 (Pin) 9W Energy Saving Bulb
Specifications:
• Optional wattage: 7-105W
• Operating voltage: 110 to 130V or 220 to 240V
• Frequency: 50/60Hz
• Average lifetime: 6000hrs/8000 hrs/10000hrs available
• Optional base: E27/B22/E14
• Optional Color Temperature: 2,700K/4,100K/6,500KApplications:
Shopping malls, table lamps, pendent lamps, supermarkets, restaurants, shops, hotels etc.SKU: 2000 -
CATRIDGE AND INKS
HP 647A Black Original LaserJet Toner Cartridge (CE260A)
HP 647A Black Original LaserJet Toner Cartridge
(CE260A)Overview
Achieve professional results on business documents, and get reliable cartridge performance. HP Color LaserJet toner cartridges ensure you stay productive and avoid wasted time and supplies. HP cartridges are specifically designed for your printer.Features
Print standout business documents with sharp black text, using Original HP cartridges with ColorSphere toner. Get print shop-quality results in the office—HP toner is compatible with a wide range of laser papers and delivers consistent results.Keep printing costs low while maintaining productivity. HP Color LaserJet toner cartridges deliver consistent, uninterrupted printing. Because cartridges are designed for exceptional reliability, you avoid wasted supplies and expensive delays.
Choose the black toner cartridge that’s right for your office. This standard cartridge is ideal for everyday office printing. Easily track toner usage and reorder, thanks to intelligence built into Original HP cartridges.
Specifications
Color(s) of printing supplies
Black
Print technology
Laser
Page yield (black and white)
8,500 pagesSKU: HP647 -
CHANDELIER LIGHT, Electro, HOME&OFFICE LIGHTING, LIGHTING
Marie Therese Chandelier Clear 5 Arm
‘-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority.
SKU: 1384
There are no reviews yet.