LED 19w (incl.) 3000K CRI 80
LED 13w (incl.) 3000K CRI 80
LED 19w (incl.) 3000K CRI 80
LED 13w (incl.) 3000K CRI 80
ladder comes in a vertical or inclined set of rungs or steps. There are two types: rigid ladders that can be leaned against a vertical surface such as a wall, and rope ladders that are hung from the top. The vertical members of a rigid ladder are called stringers or rails (US) or stiles (UK). Rigid ladders are usually portable, but some types are permanently fixed to buildings. They are commonly made of metal, wood, or Fiberglass, but they have been known to be made of tough plastic.
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.
‘-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self- certification scheme. Further information is available online or from your local authority-
Spin-on/off cover with smooth cable entry Base incorporates Live, Neutral and Loop-in terminals (3 plate) Wiring aperture in base with extra knockout for ease of wiring Alternative fixing holes allow for off centre mounting Size 90mm diameter x 34mm
Rechargeable Solar fan with LED lamp and AC 220V adapter
(1) 400MM fan blades 21LEDs; Fan Height:120CM;
(2) 2 maintenance free lead-acid batteries 6V4.0Ah*2;
(3) 3 level controller H:1350RPM?M:1150RPM;L:1000RPM;
(4) a wide-angle air supply; the level of directional adjustment;
(5) After charged it can works 3.5hrs for high speed,6hrs for low speed?
(6) Case Material ABS+PP+ Rail?Surface Treatment
(7)charging method:AC110V/220V;charging time:6~8hrs
(8)The AC adapter can also charge the battery while the fan is working ,and the light turns green when the batteris are full.
There are no reviews yet.