Barricade tape is brightly colored tape (often incorporating a two-tone pattern of alternating yellow-black or red-white stripes or the words “Caution” or “Danger” in prominent lettering) that is used to warn or catch the attention of passersby of an area or situation containing a possible hazard
Caution Line Tape-Safety Warning Tape
. It acts as a minor impediment to prevent accidental entrance to that area or situation and as a result enhances general safety.
₦0.00
CompareBased on 0 reviews
Be the first to review “Caution Line Tape-Safety Warning Tape”
-
CABLE AND CABLE MANAGEMENT, Electro, SINGLE CORE WIRE
NigerChin 10mm Single Core Copper Wire – Red
PvC insulated flame retardant cables are fixed laid in the circuit with frequency 50Hz and voltage up to 0.6/1KV running from the main breaker panel or fuse box outlets to provide reliable, high-quality electrical current for your residential installations with our range of 100% pure copper wire from top brands like Nigerchin, Coleman, Kablemetal, Cutis, Doncaster, Prysmian etc you are sure of authentic products.
SKU: 793 -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
Standard 32Amps Changeover Switch
Features:
DMC terminal blocks are provided for cable termination having excellent mechanical, thermal and dielectric properties.
Side Handle Operation.
The enclosure is made of sheet steel suitable for individual mounting.
Terminals suitable for both Al. & Cu conductors.
Adequate knockouts provided for entry of cables.
Door interlocking facility provided.
mounting holes for switch ratings upto 320A and mounting brackets
for switch rating of 400A and above.SKU: Standard32 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
70mm x 4Core Armoured Cable – Coleman
Suitable for under and over-ground usage alike, 70mm 4 Core Armoured Cable is a dust and waterproof variant of electrical cable that is commonly found within powered networks and supplying mains electricity to a large variety of devices, both domestic and industrial.
This particular type of cable is constructed using Plain Annealed Stranded Copper for the conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing and Steel Wire for the armouring.
Not only does the Steel Wire Armour provide a method of mechanical protection, meaning it is suitable for installation into highly-corrosive environments, the armour also provides a form of CPC (Circuit Protective Conductor) meaning it can be used as an earth for the cable. This means that an earth core/cable is not required although it is still recommended as an extra safety measure.
No. of cores / size of cable – 4
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000VtSKU: coleman70mm -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Powertec 12 Way 100A Single Phase Consumer Units DB C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroPowertec 12 Way 100A Single Phase Consumer Units DB C/W MCB
Features
These are most elegantly designed DBs, to suit the decor of homes
Raised neutral link for easy wiring
Spring loaded outer cover swings open by just pressing the lock as in case of Elegance series.
Supplied with masking sheet to protect components from cement during plastering
Supplied with neutral & earth link, top & bottom detachable platesSKU: 276 -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
STANLEY 630A Changeover
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Changeover are made as per industrial requirements with powder coating. This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows: 1. Dielectric Test 2. Mechanical Operation Test 3. High Voltage Test 4. Insulation Resistance Test 5. Temperature Rise Test 6. Mini Volt Drop Test Stanley 600A Changeover Switch
SKU: Stanley600A -
CATRIDGE AND INKS
HP 93A Black Original LaserJet Toner Cartridge (CZ192A)
Overview
Original HP 93 LaserJet Toner Cartridges deliver professional-quality business documents. Stay productive by avoiding wasted time and supplies. These reliable cartridges are specifically designed for your HP LaserJet Pro MFP.
Features
Get the quality you expect, time after time, from Original HP Toner Cartridges. Avoid the reprints, wasted supplies and costly delays that can occur with remanufactured cartridges.Keep your business moving forward. Trust Original HP Toner Cartridges for consistent, uninterrupted printing that keeps you on track and on budget.
Don’t miss a beat. Replace Original HP Toner Cartridges in seconds and go back to printing. They’re specifically designed for your HP LaserJet Pro MFP – with the toner and imaging drum in one easy-to-install supply.
Help conserve resources. Recycle your Original HP Toner Cartridges – it’s easy and free with the HP Planet Partners programme, available in more than 50 countries and territories worldwide.2
Specifications
Color(s) of printing supplies
Black
Print technology
Laser
Page yield (black and white)
12,000 pagesSKU: HP93A
There are no reviews yet.