Cometstar PVC Insulated and Sheathed Armoured Copper Cable are equipped with:
1. Copper Conductor
2. PVC Insulation
3. Round or Flat Wire Armouring
4. PVC Outer Sheath and Bedding
Cometstar 150mm x 4core Armoured Cable
₦130,950.00
CompareBased on 0 reviews
Be the first to review “Cometstar 150mm x 4core Armoured Cable”
-
ELECTRICAL FITTINGS, Electro, TRUNCKING
75x75mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 413 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
10mm x 4Core Armoured Cable Coleman
Suitable for under and over-ground usage alike, 6mm 4 Core Armoured Cable is a dust and waterproof variant of electrical cable that is commonly found within powered networks and supplying mains electricity to a large variety of devices, both domestic and industrial.
This particular type of cable is constructed using Plain Annealed Stranded Copper for the conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing and Steel Wire for the armouring.
Not only does the Steel Wire Armour provide a method of mechanical protection, meaning it is suitable for installation into highly-corrosive environments, the armour also provides a form of CPC (Circuit Protective Conductor) meaning it can be used as an earth for the cable. This means that an earth core/cable is not required although it is still recommended as an extra safety measure.
No. of cores / size of cable – 4
Approx overall diameter – 18.7mm
Approx weight (m) – 0.75Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000VtSKU: coleman10mm -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
240mm x 4 Core Armoured Cable (Kabelmetel Nexans Nigeria)/Per meter
ARMOURED CABLE, ELECTRICAL INDUSTRIAL240mm x 4 Core Armoured Cable (Kabelmetel Nexans Nigeria)/Per meter
240mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.
240mm 4 Core Armoured Cable is constructed from the following materials;– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
– Voltage Rating: 600/1000Vt
SKU: AC240 -
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGS
Fluorescent Fitting Philip with lamps 2ft Single Philips
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGSFluorescent Fitting Philip with lamps 2ft Single Philips
1. Effective, high-quality batten for a single fluorescent lamp; suitable for both direct and indirect lighting applications
2. Integrated slim HF electronic ballast for compactness
3. Easy fixing to ceiling with baseplate on which all the electrical and mechanical components are mounted
4. Low Energy Consumptiom
5. Fluorescent Tube IncludedSKU: fitting4
There are no reviews yet.