Cometstar PVC Insulated and Sheathed Armoured Copper Cable are equipped with:
1. Copper Conductor
2. PVC Insulation
3. Round or Flat Wire Armouring
4. PVC Outer Sheath and Bedding
Cometstar 70mm x 4core Armoured Cable
₦66,800.00
CompareBased on 0 reviews
Be the first to review “Cometstar 70mm x 4core Armoured Cable”
-
SOLAR POWERED
Solar Lighting Kit
1.Solar Panel:10W/18V with 6M cable
2.Lamp:4PCS super bright 3W LED lamp wih 5M cable
3.USB interface:USB output can charge for mobile phone,MP3,MP4,ect
4.Charging time:About 10-11 hours(by solar panel)
about 5-6hours(by adapter)
5.Lighting time?4PCS 3W LED 6-7 hours when the battery is fully charged.SKU: 1536 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Hager 6 Way 100A Single Phase Consumer Units DB C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroHager 6 Way 100A Single Phase Consumer Units DB C/W MCB
Features
These are most elegantly designed DBs, to suit the decor of homes
Raised neutral link for easy wiring
Spring loaded outer cover swings open by just pressing the lock as in case of Elegance series.
Supplied with masking sheet to protect components from cement during plastering
Supplied with neutral & earth link, top & bottom detachable platesSKU: 267 -
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGS, FLUORESENT TUBES, INDOOR LIGHTS, LIGHT BULBS, LIGHTING
Warom Explosion Proof Corrosion Proof Fluorescent Lamp 4ft Double (tubes type)
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGS, FLUORESENT TUBES, INDOOR LIGHTS, LIGHT BULBS, LIGHTINGWarom Explosion Proof Corrosion Proof Fluorescent Lamp 4ft Double (tubes type)
Widely used for the illumination of various marine platforms, chemical tankers, LNG ships and hazardous cargo wharf etc.
Can reliably work in severe environment exposed to moisture, vibration or corrosion;
Explosive hazardous atmosphere Zone 1, Zone 2, Zone 21 and Zone 22
Explosion -proof electronic ballast, wide voltage input
SKU: Explosion Proof Corrosion Proof -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 2.3-4amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload2 -
Electro, GEAR SWITCHES, GEAR SWITCHES & CHANGEOVER
MEM – Eaton 300A TPN Gear Switch
The top and bottom endplates are removable. Door can be removed for ease of installation. Incorporate knockouts and gasketed doors, IP41 rated protection. Handle: chromium-plated handles with ON (I) / OFF (O) indication. The switch can be locked ON or OFF by means of a padlock. Internal fixing: enables the unit to be mounted side by side with other units. Maximum current: 300A Number of Poles: 3 Poles. 3 Phase. Switches: quick make-and-break type, suitable for use on AC or DOC. Removable moving contact assemblies: to facilitate wiring. Interiors comprise porcelain bases fitted with non-ferrous conducting components.
SKU: MEM300
There are no reviews yet.