This classic circular domed ceiling light is so simple it can be used in any room of the house, including the bathroom. The frosted white glass circle gives off a soft, even light and sits flush to the ceiling encased in a high-shine chrome-effect metal ring that, with its three protruding bolts, has the look of a porthole. If fitted in a bathroom, care should be taken with placement – full instructions regarding zones and safety are provided as part of the light’s instructions. The light is 8cm in height and 30cm wide and requires mains supply, wiring and some assembly, for which full instructions are provided.
Flush Fitting Ceiling Light Chrome Effect
This flush-fitted domed chrome frosted ceiling light takes either a GLS ES 42W halogen bulb, or a 12W energy saver, which are not included. Flush fitting ceiling light fitting. Wiring required. Maximum 1x 42W E27 GLS Halogen ES bulb or 12W energy saving bulb required. Bulb not included. Suitable for use in bathrooms excluding zone 0,1,2. For indoor use only. Always read instructions.
₦9,000.00
CompareBased on 0 reviews
Be the first to review “Flush Fitting Ceiling Light Chrome Effect”
-
Electro, HOME&OFFICE LIGHTING, LIGHTING, SPOTLIGHTS
3 Arm Dome Spotlight Ceiling Light Silver
-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self- certification scheme. Further information is available online or from your local authority-
SKU: 223 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
2.5mm x 4Core Armoured Cable (Kablemetal)
2.5mm 4 Core Armoured Cable is commonly found supplying mains voltage electricity to powered devices and networks. For example, it could be used to power outdoor buildings such as garden sheds or workshops as well as garden features such as jacuzzi/hot tubs.
The cable contains a steel wire armour, meaning it provides a mechanical protection for the insulating layers underneath. This also enables the cable to have higher pulling loads, making it perfectly suitable for dispensing from a cable drum on a building site, etc.
It’s construction is commonly identified by the plain annealed stranded copper for the cores, the PVC (Polyvinyl Chloride) for the bedding and sheathing, armour made from steel wire and XLPE (Cross-Linked Polyethylene) for the insulation.
The Steel Wire can also be used as a CPC (Circuit Protective Conductor), meaning the armour can be used an earth for the cable. This means that even though the cable has an earth core, it is still protected, meaning it abides by all health and safety regulations.
No. of cores / size of cable – 4
Approx overall diameter – 15.3mm
Approx weight (m) – 0.43Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: – 600/1000VtSKU: 8515 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 4-6amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload1 -
INDOOR LIGHTS
LED Tube T8 (Iflux) 9Watt
Features
â–ª Luminous efficacy up to 90lm/W
â–ª Professional coating, environmental and durable
â–ª True and natural colours, with CRI up to 70
â–ª Built-in constant current LED driver
▪ Beam angle: 130°
â–ª 220V power supply connected
â–ª signle-ended output, easy to replaceSKU: iflux3 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
50mm x 4Core Armoured Cable (Kablemetal Nexans Nigeria)
50mm 4 Core Armoured Cable is a large and specific size of Armoured Cable, primarily found within large powered networks whilst also carrying power to a range of different powered devices. Although this cable can be used for domestic uses such as powering outdoor sheds and greenhouses as well as water features and outdoor lights, due to its size, it is commonly found within more industrial installations such as power stations and large construction sites.
The cable is constructed itself from the following; Plain Annealed Stranded Copper for the cores/conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing & steel wire for the armour protecting the layers beneath.
The steel wire armour within the cable also provides a mechanical protection, therefore it enables the cable higher pulling loads, which is useful for when the cable is being dispensed from a large drum.
No. of cores / size of cable – 4
Approx overall diameter – 31.3mm
Approx weight (m) – 2.95Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Used primarily within large powered networks supplying mains electricity to multiple devices.
Voltage Rating: 600/1000VtSKU: 1520
There are no reviews yet.