T2 lamp holder with push bar, threaded. 0.5in threaded, T2 lamp holder with push bar switch. If in doubt consult a qualified electrician
Lamp Holder 1/2in Push Bar
Always read instructions.
₦150.00
CompareBased on 0 reviews
Be the first to review “Lamp Holder 1/2in Push Bar”
-
HIGH BAY LIGHTS
Luceco LED Highbay Light LHBR 150W (23100lm)
Product Features
IP65 highbay with industry-leading efficacy
Multiple mounting options
Integrated heat sink
IP65 PIR sensor compatible
IP65 Integrated emergency
Stainless steel hardware
0-10V Dimmable
Supplied with 2′ of SJTW cable
1′ safety chain includedColor Temperature: 4000K, 5000K
Efficacy: Up to 160lm/W
Lumen Maintenance: L70 calculated at 100,000hrs
IP Rating: IP65
Beam Angle: 60°, 90°, 120°SKU: luceco150w -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1 -
SOLAR POWERED
Solar Panel 250W
• YL250P-29b:
• Module Type: YL250P-29b Dimension: 1640*990*35/30mm,
• Weight: 18kg Package: 2PCS in Carton
• Application Class: A
• Rated Max Power: 250W(+-3%)
• Rated Voltage: 30.0V Open Circuit Voltage: 37.5V
• Rated Current: 8.33A Short Circuit Current: 9.08A
• Max. Series Fuse: 15A Max System Voltage: 600V
• Please see the serial number on the frontside of module
• Fire Resistance Rating: Class CSKU: 1542 -
WIRE CABLE TRAY & CABLE LADDER
150mm X 50mm Nigeria made Galvanized Cable Tray By 2.5 Meter
Embedded perforations for : – extra load capacity – better aeration – better stability – better condensation drainage Alternative perforations for : – better fixation on the supports – very useful for cable fixation -Standard finish Galvanized
SKU: N150x50 -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
STANLEY 630A Changeover
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Changeover are made as per industrial requirements with powder coating. This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows: 1. Dielectric Test 2. Mechanical Operation Test 3. High Voltage Test 4. Insulation Resistance Test 5. Temperature Rise Test 6. Mini Volt Drop Test Stanley 600A Changeover Switch
SKU: Stanley600A
There are no reviews yet.