. If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self certification scheme. Further information is available online or from your Local Authority. Single, white dimmer switch. If in doubt consult a qualified electrician. Always read instructions.
MK Logic Plus Dimmer Switch
One way dimmer switch. 250w. For your safety, this product must be installed in accordance with local Building Regulations
₦9,500.00
CompareBased on 0 reviews
Be the first to review “MK Logic Plus Dimmer Switch”
-
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 18 – 23amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload7 -
ELECTRICAL FITTINGS, Electro, MODULAR FITTING
600×1200 Recessed Modular Fitting
Modular Fitting has an extremely small recess depth 53mm which makes it perfect for shallow ceiling voids. It is also suitable for lay in suspended grid ceilings and comes complete with wire retention safety cable. Rapid installation and maintenance are further facilitated by a quick release louvre device, which is particularly useful during potentially disruptive lamp changes. Ivy Classic is also supplied with a peel off protective cover, to keep the luminaire bright, clean and dust free during carriage and installation.
SKU: 670 -
SOLAR POWERED
Solar Power Systems 50W/18V
*solar panel: 50W/18V
*battery: 12V/55AH
*controller: 12V/15A
*inverter: 12V/200W sine wave * Multiple AC and DC output interface to achieve multiple
purposes: 1*20V DC, 1*12V DC, 1* 9V DC, 1*3.3V DC,
4*5V USB, 2* 220V AC.
*Electricity generated per day: Approximately 0.3KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 0.95 KWH.
*Total power consumption of loads should not exceed
200W per hour
*AC Adapter : Input AC100-240V,output DC16V/3-4A,
by option.SKU: 1553
There are no reviews yet.