Philips 10W MASTER LEDspots LV MR16 GU5.3 2700K 24 Deg
– Available in Very Warm White
– Available with a 24 degree beam angle
– Energy Efficient
₦4,500.00
ComparePhilips 10W MASTER LEDspots LV MR16 GU5.3 2700K 24 Deg
– Available in Very Warm White
– Available with a 24 degree beam angle
– Energy Efficient
*solar panel: 100W/18V
*battery: 12V/100AH
*controller: 12V/15A
*inverter: 12V/300W sine wave * Multiple AC and DC output interface to achieve multiple
purposes: 1*20V DC, 1*12V DC, 1* 9V DC, 1*3.3V DC,
4*5V USB, 2* 220V AC.
*Electricity generated per day: Approximately 0.3KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 0.95 KWH.
*Total power consumption of loads should not exceed
200W per hour *AC
Adapter : Input AC100-240V,output DC16V/3-4A, by
option.
• Suitable for individual mounting, inner mounting holes and mounting brackets provided in enclosures.
• Sheet steel enclosure duly phosphatised and powder painted for longer life.
• Provision for door interlocking.
• Termination suitable for Aluminum cables, adequate knockouts provided in the enclosure for cable entry
630A, 63A, 400A, 200A, etc
70mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
70mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
No. of cores / size of cable – 4
Approx overall diameter – 36.8mm
Approx weight (m) – 4.23Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel Wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Primarily found in large powered networks as well as buried underneath roads supplying mains electricity to large buildings etc.
Voltage Rating – 600/1000Vt
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.
There are no reviews yet.