Different Technologies are coming up to reduced environmental hazards arising from power generation effluents/wastes that have greenhouse effects. An example of such technologies is the solar technology. To this end, we have introduced Electronics powered by solar that is the most advanced and sophisticated in the industry to date.
Solar Lighting Kits
Out of stock
Solar Panel: 5W/18V with 6M cable
Lamp: 2Pcs super bright 3W LED lamp wih 5M cable
USB interface: USB output can charge for mobile phone, MP3, MP4, etc
Charging time: About 11-12 hours(by solar panel) about 3-4hours(by adapter)
Lighting time: 2Pcs 3W LED 6-7 hours when the battery is fully charged.
AC Adapter: Input AC100-240V,output DC16V/2A,by option.
₦11,500.00
Out of stock
CompareBased on 0 reviews
Be the first to review “Solar Lighting Kits”
-
Uncategorized
BG Nexus 10Amp 10AX 2 Gang 2 Way Light Switch Brushed Steel NBS42
BG Nexus 2 Gang 2 Way 10Amp 10AX Light Switch is part of a subtlety designed range suitable for both domestic or commercial installations
Key Features
Fixed integrated plastic gasket to protect metal edges from moisture
Stylish modern slim profile
Colour matched fixing screws
Lightly lacquered surface to reduce fingerprint marksInstallation
Backed out captive screws for easy installation
Minimum mounting box depth 16mm
Terminal capacity 4 x 1.00mm²; 4 x 1.5mm²; 2 x 2.5mm & 1 x 4.0mm²Technical
Manufactured to BS EN 60669-1
Guaranteed against faulty materials and workmanship for a period of 25 years from date of deliveryColour – Steel
Finish – Brushed Steel
Range – Nexus Metal
Size – 86 x 86 x 21.2mm
Unit Of Sale – Each
Brand – BG Nexus
EDP code – NBS42
Screwed / Screwless – Screwed
Number of Gangs – 2 Gang
Amps – 10ASKU: NBS42 -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 2.3-4amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload2 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 23 – 32amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload6
There are no reviews yet.