All ABB distribution boards incorporate unique design features making installation, modification an easy operation and less time consuming. Removal or change of gland plates and fixing of top / bottom extension boxes is quick & easy.
ABB 6 Way 100A Consumer Unit SPN Distribution Board
The SPN/TPN distribution boards accept a variety of incoming devices, isolator, miniature circuit breaker, residual current device, MCCB or direct cable connection.
₦123,800.00
CompareBased on 0 reviews
Be the first to review “ABB 6 Way 100A Consumer Unit SPN Distribution Board”
-
SOLAR POWERED
Solar Rechargeable Fan
Rechargeable Solar fan with LED lamp and AC 220V adapter
(1) 400MM fan blades 21LEDs; Fan Height:120CM;
(2) 2 maintenance free lead-acid batteries 6V4.0Ah*2;
(3) 3 level controller H:1350RPM?M:1150RPM;L:1000RPM;
(4) a wide-angle air supply; the level of directional adjustment;
(5) After charged it can works 3.5hrs for high speed,6hrs for low speed?
(6) Case Material ABS+PP+ Rail?Surface Treatment
(7)charging method:AC110V/220V;charging time:6~8hrs
(8)The AC adapter can also charge the battery while the fan is working ,and the light turns green when the batteris are full.SKU: 1528 -
CABLE AND CABLE MANAGEMENT, Electro, SINGLE CORE WIRE
Cutix 16mm Single Core Copper Wire
Our cables with PVC (Polyvinyl Chloride) sheathing are used in a vast number of applications from fixed wiring to flexible installations and they are available in various sizes, colours and number of conductors.
SKU: 338 -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1 -
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGS, FLUORESENT TUBES, INDOOR LIGHTS, LIGHT BULBS, LIGHTING
Warom Explosion Proof Corrosion Proof Fluorescent Lamp 4ft Double (LED type)
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGS, FLUORESENT TUBES, INDOOR LIGHTS, LIGHT BULBS, LIGHTINGWarom Explosion Proof Corrosion Proof Fluorescent Lamp 4ft Double (LED type)
Widely used for the illumination of various marine platforms, chemical tankers, LNG ships and hazardous cargo wharf etc.
Can reliably work in severe environment exposed to moisture, vibration or corrosion;
Explosive hazardous atmosphere Zone 1, Zone 2, Zone 21 and Zone 22
Explosion -proof electronic ballast, wide voltage input
SKU: Explosion Proof Corrosion Proof-1
There are no reviews yet.