1. WL:620-630 nm
2. LED QTY: 60 pcs/m
3. LED type: SMD3528
4. Voltage :DC 12V
5. Power/M: 4.8W
6. Packing: 5M/Reel
Based on 0 reviews
Be the first to review “LED Strip – Red”
-
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 23 – 32amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload6 -
CABLE AND CABLE MANAGEMENT, Electro, FLEXIBLE WIRE
4mm x 3core Flex Cable – Coleman/roll
4mm X 3Core Flexible cable is the ideal cable for the installation of submersible pump and the like devices. It can as well be used to power Air-Conditioner. It is highly conductive and durable. It is 100% pure copper, 100meter long and full guage of 4mm.
SKU: flex4mm -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1 -
ELECTRICAL FITTINGS, Electro, TRUNCKING
100x100mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 406
There are no reviews yet.