Complete range of 0.6m, 1.2m, 1.5m.Up to 70%~80% Energy-saving. Work without external ballast, Instant soft-start.No RF interference, No flickering or buzzing.Quick and easy installation to minimize retrofit costs. No Mercury and other hazardous materials, fully RoHS-compliant. ●Typical energy efficiency(1.2m): 1550lm@2700K@18W (>80lm/W);1700lm@4000K@18W (>90lm/W);1800lm@6000K@18W (>100lm/W) . ● Universal voltage: AC90-277V. ● Harmonic distortion 0.9. ● Uniform light output. ● Single end electricity & high safety. ● Almost zero UV&IR emissions
Osram LED T8 SubstiTUBE Value 1200mm (4ft)
Product family features
- T8 LED tube made of glass with G13 base
- Mercury-free and RoHS compliant
- Luminous efficacy: up to 86 lm/W
- Type of protection: IP20
Product family benefits
- High color homogeneity
- Energy savings of up to 68 % compared to conventional 1,500 mm T8 fluorescent lamp
- Instant flickerfree starting
Areas of application
- Corridors, stairways, parking garages
- Cooling and storage rooms
- Warehouses
- Domestic applications
- General illumination within ambient temperatures from –20…+45 °C
Equipment / Accessories
- Suitable for operation on magnetic control gear
Legal advice
When used to replace a T8 fluorescent lamp the total energy efficiency and light distribution depends on the design of the lighting system.
₦14,850.00
CompareBased on 0 reviews
Be the first to review “Osram LED T8 SubstiTUBE Value 1200mm (4ft)”
-
SOLAR POWERED
Solar Fan With Radio
1.Rechargeable LED light:32pcs high brightness LED lamp as table lamp which can be lighting above 8 hours at high mode and 22 hours at low mode;
2.FM Radio: The machine equipped with a stereo FM radio,allow you to enjoy the airwaves to bring the fun anytime,aywhere;
3.Air Fan: a.Provide wind in hot weather.b Speed:6000rpm c.Power:2.3W,Input Current:70mA;
4.Battery:3.7V 4000mAH lithium battery;
5.Charging time:a.About 10 hours by solar panel b.About 12 hours by AC adaptor;
6.Recharge every three months if the light is not used for a long time.SKU: 1530 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
240mm x 4 Core Armoured Cable (Nigerchin Cable and Wire)
240mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.
240mm 4 Core Armoured Cable is constructed from the following materials;– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
– Voltage Rating: 600/1000Vt
SKU: 240mmnigerchin2 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Powertec 8 Way 100A Single Phase Consumer Units DB C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroPowertec 8 Way 100A Single Phase Consumer Units DB C/W MCB
Features
These are most elegantly designed DBs, to suit the decor of homes
Raised neutral link for easy wiring
Spring loaded outer cover swings open by just pressing the lock as in case of Elegance series.
Supplied with masking sheet to protect components from cement during plastering
Supplied with neutral & earth link, top & bottom detachable plates.SKU: 282 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Eaton-MEM 4way Three Phase(TPN) Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroEaton-MEM 4way Three Phase(TPN) Distribution Board C/W MCB
Compact DBs which occupy minimum space Raised neutral link for easy wiring Suitable for surface & fush mounting Detachable din bar with end stoppers for easy assembly of breakers Supplied with fully shielded bus-bars Level marks for providing indication for fitment in wall Supplied with neutral & earth link, top & bottom detachable plates Supplied with masking sheet to protect components from cement during plastering
SKU: 250 -
CIRCUIT BREAKERS, DISTRIBUTION BOARDS, Electro
ABB SACE Tmax XT1B 160 Breaker 32A
A complete range of moulded case circuit-breakers up to 3200 A.
All the circuit-breakers, both three-pole and four-pole, are available in the fixed version; sizes T4 and T5 in the plug-in version and T4, T5, T6, and T7 also in the withdrawable one.
* High breaking capacity in compact dimensions
High values of short circuit breaking capacity are guaranteed at different voltage levels, without compromising overall dimensions.* Flexibility of use
Thermomagnetic and electronic trip units are available for use in AC/DC or in AC only. It is possible to interchange trip units keeping the
same breaking part, so that installation can be upgraded with fewer costs.* Advanced protection
A complete range of electronic trip units is suitable for different level of protection, even enhancing selectivity values with Early Fault
Detection and Prevention algorithm.SKU: ABB TXB3
There are no reviews yet.