Disbo Extra is a complete range of single and 3 phase distribution boards for commercial and industrial applications.
Standard distribution boards up to 24 ways
Meter ready distribution boards up to 24 ways
Split metered distribution boards up to 22 ways
Any outgoing way can be converted to switch the Neutral
Fully type tested conditional short circuit rating of 25kA to BS EN 61439-3
High performance MCB 10kA BS EN 60898 15kA BS EN 60947-2 in B, C or D curve 1, 2, 3, 4 pole
250A Busbar rating
Schneider Electric 3 Phase 12 Ways Distribution Board FLUSH Disbo Extra
Key Features
Full range of device accessories and auxiliaries
Knockouts for cable gland and conduit mixed to suit the installation needs without loss of space
Removable insulated pan assembly
Fully shrouded neutral
Split neutral bars
Removable gland plates
Optional metering, dual supply, surge protection and contactor on incoming Metered extension enclosures.
Product Range – Disbo
Product or Component Type – Distribution Board
Number of Phases – 3 Phase
Number of Ways – 12 Way
Type of Inomer – 3P Isolator 125A
Device Mounting – Flush
₦528,800.00
CompareBased on 0 reviews
Be the first to review “Schneider Electric 3 Phase 12 Ways Distribution Board FLUSH Disbo Extra”
-
Electro, GEAR SWITCHES, GEAR SWITCHES & CHANGEOVER
MEM – Eaton 800A TPN Gear Switch
The top and bottom endplates are removable. Door can be removed for ease of installation.
Incorporate knockouts and gasketed doors, IP41 rated protection.
Handle: chromium-plated handles with ON (I) / OFF (O) indication. The switch can be locked ON or OFF by means of a padlock.
Internal fixing: enables the unit to be mounted side by side with other units.
Maximum current: 800A
Number of Poles: 3 Poles. 3 Phase.
Switches: quick make-and-break type, suitable for use on AC or DOC.
Removable moving contact assemblies: to facilitate wiring.
Interiors comprise porcelain bases fitted with non-ferrous conducting components.SKU: MEM800 -
Electro, GEAR SWITCHES, GEAR SWITCHES & CHANGEOVER
HAVELLS 200A ROTARY CHANGEOVER SWITCH
• Suitable for individual mounting, inner mounting holes and mounting brackets provided in enclosures.
• Sheet steel enclosure duly phosphatised and powder painted for longer life.
• Provision for door interlocking.
• Termination suitable for Aluminum cables, adequate knockouts provided in the enclosure for cable entry
630A, 63A, 400A, 200A,SKU: 1568 -
ELECTRICAL FITTINGS, Electro, TRUNCKING
25x40mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 409 -
ELECTRICAL INDUSTRIAL, TRANSFORMER
ABB Transformer 800kVA/33 ABB Cu/Cu Oil Filled Groundmount Transformer
ELECTRICAL INDUSTRIAL, TRANSFORMERABB Transformer 800kVA/33 ABB Cu/Cu Oil Filled Groundmount Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
SKU: dts80033
There are no reviews yet.